Cat C32 Generator Set (IMO III)
Home » New Power » Cat C32 Generator Set (IMO III)
Cat C32 Generator Set (IMO III)
Cat C32 Generator Set (IMO III)
Home » New Power » Cat C32 Generator Set (IMO III)
-
Generator Set Specifications
-
- Minimum Rating
-
219 ekW
- Maximum Rating
-
940 ekW
- Frequency
-
60hz
-
Engine Specifications
-
- Configuration
-
Vee-12, 4-stroke-Cycle-Diesel
- Aspiration
-
Turbocharged-aftercooled aspiration
- Bore
-
5.71in
- Stroke
-
6.38in
- Displacement
-
1959in³
- Emissions
-
IMO III emissions certified (SCR required)
- Rated Engine Speed
-
1500 rpm
- Governor
-
Electronic (A5 ECM)
- Refill Capacity
-
Lube Oil System w/ oil filter change: 146 L (38.5 gal)
- Oil Change Interval
-
750 hrs
- Cooling
-
Heat exchanger, keel or radiator cooled
- Generator
-
SR5 - Form Wound
-
Generator Set Dimensions
-
- Length
-
167.2 in/4245 mm (minimum), 226.1 in/5742 mm (maximum)
- Width
-
59.9 in/1521 mm (minimum), 89.8 in/2280 mm (maximum)
- Height
-
70.4 in/1747 mm (minimum), 92.8 in/2356 mm (maximum)
- Package Dry Weight
-
15721 lb/7131 kg (minimum), 21998 lb/9978 kg (maximum)
Standard Equipment:
-
Air Inlet System
-
- Separate circuit aftercooled (SCAC)
- Closed crankcase fumes disposal
-
Control System
-
-
Cooling System
-
- Heat exchanger or Keel Cooling
- Watercooled exhaust manifold and turbocharger
- Hard seawater lines – no flexible hoses
- Flanges for cooling connections, ANSI or DIN
-
Fuel System
-
- Primary fuel filter with water separator installed on base frame
- Duplex fuel filters with hybrid fuel lines
-
Generators And Generator Attachments
-
- IP23, air cooled, form wound SR5 generator offered in 380, 400, 415 and 690 V
-
Lube System
-
- Oil fill, simplex filter and dipstick
-
Mounting System
-
- Helical spring/rubber isolated mounting for vibration and structure borne noise reduction
-
General
-
- Right or left hand service sides
- Customer wiring and service tool connector
Optional Equipment:
-
Alarm And Protection
-
- MGCPIIIB control panel with Cat® Alarm and Protection System
- IP44 generator protection
-
Exhaust System
-
- Muffler
- Water-in-fuel and exhaust temperature sensors
- SOLAS approved spray shielding
-
Charging System
-
-
Fuel System
-
- Manual or electric fuel priming pump
- Fuel cooler
-
Lube System
-
-
Starting System
-
- Starting motors – air, electric or redundant