Cat C2.2 Marine Generator Set
Cat C2.2 Marine Generator Set
Cat® C2.2 Diesel Marine Generator Set has single phase ratings of 50 Hertz at 16.0 and 22.5 ekW and 60 Hertz at 19.0 and 27.0 ekW that meet U.S. EPA Tier 3 and EU IW emission standards.The Cat® C2.2 also has three phase ratings of 50 Hertz at 16.0 and 22.5 ekW and 60 Hertz at 19.5 and 27.0 ekW that meet U.S. EPA Tier 3 and EU IW emissions standards. This marine gen set is available in 12 or 24 volt as an open gen set or as an enclosed package.
-
Generator Set Specifications
-
- Minimum Rating
- 16 ekW (16kVA)
- Maximum Rating
- 27 ekW (27 kVA)
- Frequency
- 50 Hz or 60 Hz
- Speed
- 1500 rpm (50Hz) or 1800 rpm (60 Hz
- Emissions/Fuel Strategy
- EPA Tier 3, IMO NST, EU IW
-
Engine Specifications
-
- Engine Model
- C2.2, In-line 4, 4-Stroke-Cycle Diesel
- Aspiration
- Naturally Aspirated
- Bore
- 3.31in
- Stroke
- 3.94in
- Displacement
- 135in³
- Governor Type
- Electrical Ischronous
- Fuel System
- Fuel filter — RH or LH service, fuel priming, fuel transfer pump, flexible fuel lines
-
Generator Specifications
-
- Excitation
- AREP
- Pitch
- 2/3 pitch
- Number of Poles
- 4
- Number of Leads
- 4
- Insulation
- Class H
- Voltage Regulation
- ±0.5%
- Frame Size
- 2.2
- IP Rating
- 23
- Wave Form Deviation - Line to Line
- <2%
- Voltage Regulator
- Steady State
-
Dimensions & Weights
-
- Minimum Approximate Weight
- 857lb
- Height - Enclosed Set
- 31in
- Height - Open Set
- 32in
- Width - Open Set
- 20.5in
- Maximum Approximate Weight
- 1027lb
- Length - Open Set
- 45in
- Width - Enclosed Set
- 24in
- Length - Enclosed Set
- 46in
Standard Equipment:
-
Air Inlet System
-
- Air cleaner, single element canister type with rain cap (open generator set only)
-
Cooling System
-
- Belt-driven centrifugal jacket water pump, gear-driven seawater pump, heat exchanger with copper nickel tubes, expansion tank
-
Control System
-
- Electronic isochronous governor
-
Exhaust System
-
- Watercooled exhaust manifold and elbow
-
Fuel System
-
- Fuel filter — RH or LH service, fuel priming, fuel transfer pump, flexible fuel lines
-
Generator
-
- Single-phase — brushless, shunt excited, 4-pole, 4-lead reconnectable with class H insulation, automatic voltage regulation ±0.5%, 2/3 pitch, IP23 water protection, solid state voltage regulator with integral voltage adjustment potentiometer, connection poles;
-
Lube System
-
- Lubricating oil, oil filter (RH), dipstick (RH), fumes disposal (closed system)
-
Mounting System
-
- Anti-vibration mounts, connected to drip tray and steel base sitting on PVC foam sound-absorbent pad
-
Protection System
-
- Electronic automatic safety shutdown for low oil pressure, high water temperature, high exhaust (wet exhaust only) temperature, and overspeed
-
Starting System
-
- 12 or 24 volt electronic starting motor, 12 volt 55 amp alternator
-
General
-
- Single-side service (RH), decals, literature