C1.5 Marine Generator Set Engine

C1.5 Marine Generator Set Engine

C1.5 Marine Generator Set Engine

Cat® C1.5 Diesel Marine Generator Set has single phase ratings of 50 Hertz at 10.0 ekW and 60 Hertz at 12.0 ekW that meet U.S. EPA Tier 3 and EU IW emission standards. The Cat® C1.5 also has three phase ratings of 50 Hertz at 11.0 ekW and 60 Hertz at 13.0 ekW that meet U.S. EPA Tier 3 and EU IW emissions standards. This generator set is available in 12 or 24 volt as an open gen set or as an enclosed package.

Generator Set Specifications
Minimum Rating
10 ekW (10 kVA)
Maximum Rating
13 ekW (16.5 kVA)
Frequency
50 Hz or 60 Hz
Speed
1500 rpm (50Hz) or 1800 rpm (60 Hz)
Emissions/Fuel Strategy
60 Hz meets EPA Tier 3*, 50 Hz meets EU 97/68EC Stage II regulations
Engine Specifications
Engine Model
C1.5, In-line 3, 4-Stroke-Cycle-Diesel
Aspiration
Naturally Aspirated
Bore
3.31in
Stroke
3.5in
Displacement
91in³
Governor Type
Electrical Isochronous
Generator Specifications
Excitation
AREP
Insulation
Class H
Voltage Regulation
±0.5%
Frame Size
1.5
Generator Set Dimensions
Weight
319 kg/703 lbs (open), 368 kg/811 lbs (enclosed)
Length
37.4 in/962 mm (open), 40 in/1021 mm (enclosed)
Width
21 in/533 mm (open), 24 in/608 mm (enclosed)
Height
27.5 in/699 mm (open), 28 in/710 mm (enclosed)

Standard Equipment:

Air Inlet System
  • Air cleaner, single element canister type with rain cap (open generator set only)
 
Control System
  • Electronic isochronous governor
 
Cooling System
  • Belt-driven centrifugal jacket water pump
  • gear-driven seawater pump
  • heat exchanger with copper nickel tubes
  • expansion tank
 
Exhaust System
  • Watercooled exhaust manifold and elbow
 
Fuel System
  • Fuel filter — RH or LH service
  • fuel priming
  • fuel transfer pump
  • flexible fuel lines
 
Generator
  • Single Phase
 
Lube System
  • Lubricating oil
  • oil filter (RH)
  • dipstick (RH)
  • fumes disposal (closed system)
 
Mounting System
  • Anti-vibration mounts, connected to drip tray and steel base sitting on PVC foam sound-absorbent pad
 
Protection System
  • Electronic automatic safety shutdown for low oil pressure, high water temperature, high exhaust (wet exhaust only) temperature, and overspeed
 
Starting System
  • 12 or 24 volt electronic starting motor, 12 volt 55 amp alternator
 
General
  • Single-side service (RH), decals, literature
 

Optional Equipment:

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    Share This Product