3406C Propulsion Engine
The mechanically governed 3406C marine propulsion engine is available “A” rating of 365 bhp (272 bkW) and a “B” rating of 400 bhp (298 bkW).
-
Power Rating
-
- Power Range
- 365-400 bhp (272-298 bkW)
-
Engine Specifications
-
- Speed Range
- 1800 rpm
- Emissions
- Non-Certified
- Aspiration
- TA
- Bore
- 5.4in
- Stroke
- 6.4in
- Displacement
- 893.39in³
- Rotation from Flywheel End
- Clockwise
- Configuration
- In-line 6, 4-Stroke-Cycle Diesel
- Refill Capacity
- 34.0 L (9.0 gal)
- Governor
- Mechanical
- Oil Change Interval
- 250 hrs
- Cooling
- Heat exchanger or keel-cooled
-
Dimensions & Weights
-
- Length
- 57.25in
- Dry Weight - Approximate
- 2921lb
- Height
- 50.33in
- Width
- 35.96in
Standard Equipment:
-
Exhaust System
-
- Manifold & Turbocharger, watercooled
- 152 mm (6 in) round flanged outlet on 1800 rpm
- Elbow, dry, 152 mm (6 in) on 1800 rpm
- Flange, dry, 152 mm (6 in) on 1800 rpm;
-
Air Inlet System
-
- Aftercooler core, corrosion resistant coated (air side)
- Air cleaner, Regular duty, dry, panel type with service indicator.
- Turbocharger inlet, 152 mm (6 in) OD straight connection
-
Control System
-
- Governor, Hydra-mechanica
-
Flywheels & Flywheel Housings
-
- Flywheel, SAE No. 14
- Flywheel housing, SAE No. 1
- SAE standard rotation
-
Fuel System
-
- Fuel filter, Spin on, LH
- Fuel transfer pump
- Fuel priming pump
- Flexible fuel lines
- Fuel ratio control
-
Instrumentation
-
- Instrument panel, LH
- Engine Oil Pressure gauge
- Engine water temperature gauge
- Fuel pressure gauge
-
Lube System
-
- Crankcase breather
- Oil filter, Spin on, RH
- Oil filler in valve cover and dipstick, RH
- Oil pump, sump, manual
-
Mounting System
-
- Front Support
-
Cooling System
-
- Oil cooler
- Thermostats and housing, Full open temperature 92 C (198 F)
- Jacket water pump, gear driven, centrifugal
- Auxiliary sea water pump, gear driven, rubber impeller, rotary, self priming (heat exchanger engines only)
- Expansion tank
- Marine transmission oil cooler
-
Starting/charging System
-
- Charging alternator
- Electric starting motor, LH
-
General
-
- Vibration damper
- Lifting eyes
- NOTE: Engines for keel cooling do NOT include keel cooler. Engines for heat exchanger cooling do NOT include heat exchanger.
Optional Equipment:
-
Exhaust System
-
- Elbow
- Rain Cap
- Flexible Fitting
- Muffler
- Duplex fuel filters
- Water seperator
-
Control System
-
- Engine mounted controls
-
Cooling System
-
- Head exchanger - shipped loose
- Dry charge coolant conditioner
-
Lube System
-
- Sump Pump
-
Starting System
-
- Ether starting aid
- Battery Sets - 24 Volt - Dry
-
Packing
-
- Engine Protective Cover
- Storage Preservation
- Export Packing
-
General
-
- Tool set