G3520E Gas Generator Set
Home » New Power » G3520E Gas Generator Set
G3520E Gas Generator Set
Home » New Power » G3520E Gas Generator Set
G3520E Gas Generator
-
Generator Set Specifications
-
- Maximum Continuous Rating
-
2022 ekW
- Fuel Type
-
Natural Gas
- Maximum Electrical Efficiency
-
41.50%
- Maximum Standby Rating
-
2022
- Frequency
-
50
- RPM
-
1500
-
Engine Specifications
-
- Engine Model
-
G3520E
- Displacement
-
5248in³
- Aspiration
-
TA
- Bore
-
6.7in
- Stroke
-
7.5in
- Fuel System
-
Natural Gas
- Compression Ratio
-
11.9
-
Generator Set Dimensions
-
- Length
-
271in
- Width
-
79in
- Height
-
107in
- Dry Weight - Genset
-
39306lb
Standard Equipment:
-
Control Panel
-
-
Air Inlet
-
- Two-element single-stage air cleaner with enclosure and service indicator
-
Cooling
-
- Standard CAT Flange
- Right-Hand/Left-Hand Outlet Connections
- Engine driven water pumps for jacket water and aftercooler
- ANSI/DN adapter flange connections
-
Exhaust
-
- Individual exhaust port and turbocharger outlet wired to Integrated Sensing Module (ISM) with Gas ECM providing alarms and shutdowns
- Dry exhaust manifolds, insulated and shielded
-
Fuel System
-
- Fuel system is sized for 31.5 to 47.2 MJ/NM3 dry pipeline natural gas with pressure of 10.2 to 34.5KPa to the engine fuel control valve
- Fuel filter
- Engine installed, fuel metering valve
- 24V ETR Gas Shutoff Valve
- Throttle plate, 24V DC actuator, controlled by GECM
-
Ignition System
-
- Individual Cylinder Detonation Sensitive Timing (DST)
- Electronic Ignition System (controlled by GECM)
-
Generator
-
- SR4B
- Caterpillar's Digital Voltage Regulator (CDVR) with 3-phase sensing and KVAR/PF control
- Busbar connections
- SR5
- Winding temperature detectors
- Permanent Magnet Excitiation
- Anti-condensation space heater
- 3-phase brushless, salient pole
-
General
-
- RH Service
- Crankshaft vibration damper and guard
- Paint - Caterpillar Yellow except rails and radiators gloss black
Optional Equipment:
-
Air Inlet
-
- Heavy duty air cleaner
- Regular duty air cleaner
- Air cleaner with precleaner
- Mounting stand
-
Contol Panel
-
- Local NFPA99-110 Alarm Module w/LEDs
- PL1000E/PL1000T Communications Module
- Remote 24V-32V 8/16 Light Annunciator
- Custom 8-Light Alarm Module
- Engine Failure Relay
- Synchronizing Module
-
Control Panels
-
-
Cooling
-
- Jacket water coolant heater
- Cat Flange, ANS/DIN Adapter Flange
- Engine Pumps
- Aftercooler air lines, aftercooler core replacement
- Inlet/Outlet connections
-
Exhaust
-
- 15/18/25 dBA Muffler Attenuation
- 305/356mm Flange/Exhaust Expanders, 305/406mm Flange and Exhaust Expander
- 356-406mm Flange and Exhaust Expander
- Mufflers (15/18/25 dBA Attenuation) and spark-arresting muffler with ANSI companion flanges
- 305/360/406 mm Elbow Kits
- Flexible Fittings
- 16" Spark Arresting Muffler
-
Fuel System
-
- Gas Train (31.5 MJ/Nm3 with inlet pressure 19.2 to 48.3 kPa (2.78 to 7 psi))
- Gas Train 0-100 kPag, 4-20mA pressure sensors
- Fuel Filter, Gas Filter
- 24VDC Gas Shutoff Valve, Gas Knockdown Regulator
-
Generator
-
- Annunciator modules
- Air filters, cable access box
- Bearing temperature detectors
- Low voltage extension box
- 16 Point/32 light annunciator with NFPA99-110/CSA282 configuration
- Extension box, European bus bars
- Generator air filter
- Medium and high voltage generators and attachment
- 415/400/380, 3300/6600/11000 Volt Generator Options (50 Hz)
- 480/4160/13200 Volt Generator Options (60 Hz)
- 8/15/23M harness
- 8.7/15 kV Cross, Differential, Current Transformers (CCCT, DCT, CT)
- Cable access box
-
Governing System
-
-
Starting/charging
-
- Battery diconnect switch
- 45A, 24V charging alternator (requires engine driven pumps)
- 24V Starting Motors
- 20A Battery Charger
- Battery with cables and rack (shipped loose)