C7.1 Marine Auxiliary Engine (U.S. EPA Tier 3 / IMO II)
C7.1 Marine Auxiliary Engine (U.S. EPA Tier 3 / IMO II)
- 
			Power Rating
- 
		 	- Power Range
- 109 - 218 bkW
 
- 
			Generator Set Specifications
- 
		 	- Frequency
- 50 / 60
 
- 
			Engine Specifications
- 
		 	- Emissions
- U.S. EPA Tier 3, IMO II, EU Stage V, China II
- Stroke
- 5.31in
- Displacement
- 428in³
- Aspiration
- Turbocharged - Aftercooled
- Governor
- Electronic (A5E2 V2 ECM)
- Refill Capacity
- Lube Oil System w/Oil filter change: 20 L (5.3 gal)
- Configuration
- In-line 6, 4-stroke-cycle diesel
- Oil Change Interval
- 500 hours
- Cooling
- Heat exchanger or keel cooled
- Flywheel Housing
- SAE No. 03 with SAE 11.5 in flywheel
- Rotation
- Counterclockwise
- Rated Engine Speed
- 1500/1800, 600 - 2400 rpm
- Bore
- 4.13in
 
- 
			Dimensions & Weights
- 
		 	- Engine Dry Weight - Approximate
- 1676
- Height
- 34.5in
- Length
- 43.1in
- Width
- 33.5in
 
Standard Equipment:
- 
                        Cooling System
- 
                        - Gear driven jacket water pump
- Corrosion resistant sea water aftercooler
- Fuel cooler
 
- 
                        Exhaust System
- 
                        - Watercooled turbocharger and exhaust manifold
 
- 
                        Fuel System
- 
                        - Common rail fuel system
- Electric fuel priming pump
 
- 
                        General
- 
                        - Vibration damper and guard
- Self-tensioning multi-vee belt drive
 
- 
                        Lube System
- 
                        - Closed crankcase ventilation system
- Integral engine oil cooler
 
- 
                        Mounting System
- 
                        - Front and rear engine mounting brackets
 
- 
                        Starting System
- 
                        - Starter motors - 12V or 24V
 
Optional Equipment:
- 
                    Air Inlet System
- 
                    - Various 6" water cooled exhaust elbow configurations
 
- 
                    Cooling System
- 
                    - Engine mounted bilge pumps and auxiliary water pumps with electromagnetic clutch
- Tube and bundle jacket water heat exchanger and gear-driven sea water pump (rubber impeller)
- Jacket water heater
- Cabin heater (calorifier) connections
 
- 
                    Fuel System
- 
                    - SOLAS double wall high pressure fuel lines kit
 
- 
                    Lube System
- 
                    - Left-hand and right-hand oil dipsticks
- Transmission gear oil cooler (engine mounted)
 
- 
                    Protection System
- 
                    - Additional engine and transmission sensor packages for on or off vessel monitoring
 
- 
                    Starting System
- 
                    - Engine mounted secondary alternator - 24V 100 amp or 12V 175 amp
- Glow plugs
 
 
                       
 
    
